A range of high quality, polymer modified and resinous mortars, designed for undertaking Concrete Repair and Protection, in accordance with EN1504. Suitable for heavy duty industrial applications and repair of highway structures.
Products displayed with 
are environmentally friendly.
- blank
- Product
- Description
- PAck Size
- Coverage/Yield
- TDS
- Brochure
Products
Description
POLYMER MODIFIED CEMENTITIOUS CONCRETE REPAIR MORTAR characterised by its high early strength development and rapid moisture loss. The material has been designed to comply with the requirements of the HA standard BD27/86 Clause 6 and is an ideal material for the repair of bridge decks and suspended slabs prior to waterproofing.
PAck Size
- 25Kg
Coverage/Yield
12.5L
Description
HIGH STRENGTH >40N/mm² MEDIUM BUILD LIGHTWEIGHT FIBRE REINFORCED MORTAR. Polymer modified cementitious mortar which requires the addition of clean water. The product is characterised by it's excellent bond strength and high abrasion resistance, making it ideal for patching or rendering; up to 50mm on vertical surfaces and up to 30mm overhead. Complies with HA specification BD 27/86 Clause 6.
PAck Size
- 22Kg
Coverage/Yield
14LDescription
HIGH BUILD LIGHTWEIGHT FIBRE REINFORCED MORTAR designed for the repair and restoration of spalled or damaged concrete in the inverted and vertical plane. A prepacked material containing an SBR or Acrylic gauging liquid to improve bonding and waterproofing properties of the mortar. Complies with HA specification BD 27/86 Clause 6. Tested by Taywood.
PAck Size
- 20Kg
Coverage/Yield
14LDescription
Prepacked CEMENTITIOUS MORTAR for the repair of sections between 10mm - 30mm mainly in the horizontal plane. Available with either an SBR or Acrylic gauging liquid as required. Guaranteed low W/C ratio. Complies with the requirements of HA specification BD27/86 Clause 6.
PAck Size
- 27.5Kg
Coverage/Yield
13LDescription
Similar to Nucem Mortar but containing a large granotype aggregate FOR SECTIONS GREATER THAN 25mm. Available with either an SBR or Acrylic gauging liquid as required. Complies with the requirements of HA standard BD27/86 Clause 6.
PAck Size
- 27.5Kg
Coverage/Yield
12LDescription
Water dispersed CEMENTITIOUS EPOXY PRIMER TACK COAT for use with Acropak HB40 Mortar, Nucem HB Mortar, Nucem Mortar and Nucem Concrete. Also recommended for use when bonding fresh concrete to existing concrete.
PAck Size
- 1Kg
- 5Kg
Coverage/Yield
3 - 5m² per KgDescription
Single Pack ACRYLIC, READY-TO-USE PRIMER, for application with Nucem or Acropak products or as a general bonding primer.
PAck Size
- 5L
- 25L
Coverage/Yield
5 - 8m² per LitreDescription
Pre-packed one component POLYMER MODIFIED SPRAY APPLIED REPAIR MORTAR. Spraycem 301 has been designed for machine applications using the dry process and is particularly suitable on large repairs to reinforced concrete structures which have been damaged due to reinforcement corrosion or frost attack.
PAck Size
- 25Kg
Coverage/Yield
12LDescription
POLYMER MODIFIED CEMENTITIOUS LEVELLING COAT with built-in flexibility and waterproofing properties. Ideal for the treatment of repaired concrete and the surrounding areas to give an overall uniform appearance. Tested by Taywood.
PAck Size
- 12.5Kg
Coverage/Yield
6.24L @1mmDescription
Flow-applied, HEAVY DUTY SELF-SMOOTHING SCREED Laid from 5-25mm in one application; providing a smooth, dust free surface. Wearing surface for industrial and fork lift traffic.
PAck Size
- 25Kg
Coverage/Yield
14LDescription
Single pack polymer SEALER / PRIMER for use with Nucem HD. Economical in use and requires dilution with clean water only.
PAck Size
- 5L
Coverage/Yield
50m² per LitreDescription
FAST SETTING REPAIR MORTAR. A pre-packed polymer modified, rapid setting, fibre reinforced cementitious repair mortar designed to give rapid strength development even under adverse conditions. Nupatch Mortar has been specially formulated to achieve and surpass the performance requirements of EN1504 Part 3 Class R3.
PAck Size
- 25Kg
Coverage/Yield
11LDescription
A PRE-PACKED POLYMER MODIFIED, RAPID SETTING, FIBRE REINFORCED CEMENTITIOUS REPAIR MORTAR designed to give rapid strength development even under adverse conditions. The product contains a specially selected latex bonding and waterproofing gauging liquid. Nupatch Concrete has been specially formulated to achieve and surpass the performance requirements of EN1504 Part 3 Class R3.
PAck Size
- 25Kg
Coverage/Yield
11LDescription
CEMENTITIOUS PRIMER TACK COAT for use with Nupatch HB Mortar, Nupatch Mortar and Nupatch Concrete.
PAck Size
- 3.8Kg
Coverage/Yield
2.5-3.5m² per PackDescription
An easy to use CEMENTITIOUS COMPOUND which develops a high strength at an early age for small cosmetic repairs of both insitu and pre cast concrete. Can be colour-blended on site to match substrate.
PAck Size
- 7.5Kg
- 25Kg
Coverage/Yield
3.75L 12.5LDescription
BONDING & WATERPROOFING ADDITIVE. Nufix SBR is a styrene butadiene rubber latex designed to upgrade the bonding and waterproofing properties of cementitious renders, screeds, mortars and concretes.
PAck Size
- 5L
- 25L
- 200L
Coverage/Yield
N/ADescription
GENERAL PURPOSE HIGH STRENGTH EPOXY MORTAR. Epicon Mortar has been designed to comply with the requirements of EN1504 Part 3 Class R3. It is an extremely versatile epoxy mortar suitable for a number of building and repair needs where characteristics of excellent adhesive bond, high strength, abrasion and chemical resistance are required.
PAck Size
- 25KG
Coverage/Yield
12.5LDescription
RAPID CURING EPOXY MORTAR. Allows concrete repairs to be carried out with the minimum of disruption. A primer is not required and the mortar will tolerate being applied to a damp substrate.
PAck Size
- 5Kg
- 25Kg
Coverage/Yield
2.5L 12.5LDescription
High performance, solvent free EPOXIDE SCREED and RENDER designed for application to horizontal and vertical surfaces where properties of abrasion and chemical resistance as well as high strength are a requirement.
PAck Size
- 20 Kg
Coverage/Yield
2.2m² @ 5mmDescription
Cold applied FLEXIBLE, EPOXY TRANSITION MORTAR designed for bridge and car park joint transition strips. Excellent adhesion to asphalt, concrete and metal and is moisture tolerant. Ideal for bedding drainage channels, gullies and manhole frames.
PAck Size
- 20Kg
Coverage/Yield
10LDescription
EPOXY BEDDING MORTAR. Enables the fixing of kerbs directly onto concrete or asphalt eliminating the need of a bedding channel or haunching.
PAck Size
- 20Kg
Coverage/Yield
9.7LDescription
EPOXY BRIDGE BEARING MORTAR. Designed specifically for bridge bearing pad levelling plinths and other load bearing applications. Develops high strengths quickly even at low temperatures. Used in conjunction with Epicon Primer/Tack Coat 'H'.
PAck Size
- 18Kg
Coverage/Yield
8.3LDescription
POLYESTER RESIN MORTAR used for small concrete repairs or as a bedding mortar where a quick and rapid strength gain are required.
PAck Size
- 25Kg
Coverage/Yield
11.8L